Application
Slitting for label, conductive fabric, foam, diffuser,reflector film, double-sided adhesive tape, nickel plate, PET,PC,PE.
Features
It has automatic meter, set length, set quantity automatic downtime, and the release is functionally corrected by photoelectric correction control. The whole machine is compact, fast speed, high efficiency, accurate division, simple operation, smooth operation.
1. Counting function: length counting and piece counting
2. EPC system (edge positioning control): photo cell
3. Slitting unit
4. Waste discharge blower
5. Two air rewinding inflatable shafts
6. Tension control by magnetic brake & magnetic clutch
Machine parameter
| Item Number | LT-350 | LT-450 | LT-620 |
| Slitting Width | 0-350mm | 0-450mm | 0-620mm |
| Slitting speed | 0-80 m/min | 0-80 m/min | 0-80 m/min |
| Slitting precision | 0.1mm | 0.1mm | 0.1mm |
| Maximum unwinding diameter | 500mm | 500mm | 500mm |
| Maximum rewinding diameter | 500mm | 500mm | 500mm |
| Package dimension | 1200*800*1300mm | 1200*1100*1300mm | 1200*1200*1300mm |
| Weight | 480kg | 600kg | 65kg |
| Total Power | 1.2kw | 2kw | 2.2kw |
| Voltage | Customized | Customized | Customized |
Machine structure
1.Unwinding unit
Name: Unwinding air shaft. Material: air shaft
It's inflatable by air compressor, convenient to upload and discharge the material. Easy to operate, maintain,and change .
2.EPC system
Name: Electronic photo cell
Usage :Thes electrical photo cell is used to guide the non neat material. Make sure the slitting effect is good.
The photo eyes focus on the edge of material, you can choose to use single eye or double eyes.
3.Slitting unit
Name: Slitting blades. Material: 9GrSi
This machine is standard equipped with 8 sets of slitting blades. The minimum slitting width is 20 MM, If
you want to slit smaller width, you can customize self-locking knives. It's easy to adjust the slitting width
based on your products .
4.Rewinding unit
Name: rewinding air shafts. Original: China
It's inflatable by air compressor, convenient to upload and discharge the material. You can rewinding
them into one shafts or two shafts according to your products. Easy to operate, maintain and change.
More details of machine
To enable me offer you correct proposal, pls confirm following details:
1. Type of material to slit?
2. Maximum width of roll material before slitting?
3. Maximum thickness of material?
4. Maximum weight of roll material before slitting ?
5. Maximum diameter of roll material before slitting?
6. Maximum diameter of roll material after slitting?
7. Minimum width of material after slitting?
Machine photos
){kind=link}